Thermostatic Steam Traps

The HTK 75 thermostatic steam trap, built entirely in stainless steel, gives long service in corrosive environments. It can be used to discharge non-condensable gases from the system and is not affected by water hammer in steam lines. Maintenance is easy: the thermostatic capsule inside follows the steam saturation curve and discharges the condensate that forms. Depending on the condensate load, discharge is continuous or intermittent. The HTK 75 is produced as standard in the 10K version, working 10 °C below saturation temperature. Optionally 5K (5 °C below) and 30K (30 °C below) versions are available.

Connection types: 1/2"–3/4"–1" threaded BSP or NPT; DN15-20-25 flanged

Certificate: an EN 10204 3.1.B certificate can be prepared when requested with the order.

Applications

• Irons
• Tracing lines
• Drying units
• Pressing units
• Steam jacketed pipes